falk Posted January 1, 2008 Share Posted January 1, 2008 Hi, i am running a Gigabyte GA-MA790X-DS4 with 2x Corsair Value S. PC5300 DDR2 2048MB Kit w/two matched Value Select 1024MB and having PAGE_FAULT_IN_NON_PAGED_AREA errors when booting windows installation and wondering what the correct ram timings would be for this setup. If this is possible to get working at all. Link to comment Share on other sites More sharing options...
bigbuck08 Posted January 1, 2008 Share Posted January 1, 2008 COuld you post the Part Number please. How To Read The Memory Label Link to comment Share on other sites More sharing options...
falk Posted January 1, 2008 Author Share Posted January 1, 2008 VS1GB667D2 is this it? :p Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 2, 2008 Corsair Employees Share Posted January 2, 2008 Please make sure that you have the latest bios and load setup defaults and then set the memory Voltage to 2.0 Volts (+.2 Volts with GigaByte), and test the modules one at a time with http://www.memtest.org to be sure one is not failing. If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.