mtordie Posted December 29, 2007 Share Posted December 29, 2007 I am having cold boot problems with my PC. There are a ton of cold boot problems on line with this particular motherboard (Asus P5N32-E SLI Plus). Each one of them seemed to be corrected with new RAM. My ram is Twin2x2048-6400C4. I've tried changing voltages Ive tried different slots. I've upgraded the bios.... Still it will not but up from a cold start. The computer runs flawlessly otherwise. Any ideas? Link to comment Share on other sites More sharing options...
bigbuck08 Posted December 29, 2007 Share Posted December 29, 2007 Please test each module individually with BIOS defaults loaded. Test with Memtest. How To Use Memtest. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 31, 2007 Corsair Employees Share Posted December 31, 2007 Please make sure that you have the latest BIOS for your motherboard and then load optimized defaults and set the Memory Voltage to 2.1 volts and then set the timings to 4-4-4-12 (CAS-tRCD-tRP-tRAS) and then test the modules one at a time with http://www.memtest.org! Please allow memtest to run 2-3 passes on each module. If you still get errors, we will be happy to replace them! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.