Harpoon Posted December 23, 2007 Share Posted December 23, 2007 I have changed my ram DDR 2 667 Kingston 1 gb. with the TWNIN2X2048-6400C4DHX G in the slot A1 e A2 bat the boot not start signal 1beep long and 2 short. I have change the ram position in the slot but it it the same. If i use the old ram work. What there is of wrong? Thank you for cooperation, and Merry Christam to all the forum. Bye Link to comment Share on other sites More sharing options...
bigbuck08 Posted December 23, 2007 Share Posted December 23, 2007 Try each module individually and see if you can get into the BIOS. If you can load setup defaults then try both sticks. Link to comment Share on other sites More sharing options...
Harpoon Posted December 24, 2007 Author Share Posted December 24, 2007 I have tried one single ram and 1 work and the other one not. Thank you for your help. Bye. Link to comment Share on other sites More sharing options...
bigbuck08 Posted December 24, 2007 Share Posted December 24, 2007 Sounds like one module is dead. I would look into RMA'ing the set. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 25, 2007 Corsair Employees Share Posted December 25, 2007 Let's get it or them replaced, please use the On Line RMA Request Form and we will be happy to replace them or it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.