Oneshot Posted December 23, 2007 Share Posted December 23, 2007 Hello: I have (2) cmx512-2700c2 in a Soyo SY-KT333 Dragon Ultra Platnum. I would like to purchase and install (3) 1 gig modules that are as fast or faster then the 2.5's I will remove. Thank you, Oneshot (Only do it once!) Ps. Unfortunitly you didn't have "cmx1024-2700c2" and you don't have it now. Link to comment Share on other sites More sharing options...
bigbuck08 Posted December 23, 2007 Share Posted December 23, 2007 Please put the rest of your system info here, System Specs. Without them we cant really advise you what to buy. Remember to be as specific as possible. Link to comment Share on other sites More sharing options...
Oneshot Posted December 23, 2007 Author Share Posted December 23, 2007 Done! But I don't think you need that info if you can go to Soyo and see it for your self. I thought it was pretty clear :laughing: Link to comment Share on other sites More sharing options...
RJLeong65 Posted December 23, 2007 Share Posted December 23, 2007 Hello: I have (2) cmx512-2700c2 in a Soyo SY-KT333 Dragon Ultra Platnum. I would like to purchase and install (3) 1 gig modules that are as fast or faster then the 2.5's I will remove. Thank you, Oneshot (Only do it once!) Ps. Unfortunitly you didn't have "cmx1024-2700c2" and you don't have it now. Unfortuantely, the VIA KT333 chipset supports only two sticks of memory at DDR333 (PC2700) speed. If you fill up all three memory slots, you will have to run the memory at a slower DDR266 (PC2100) speed. This is a limitation of that chipset and its associated memory controller. And although Soyo is still in business, it no longer manufactures or distributes motherboards. Link to comment Share on other sites More sharing options...
bigbuck08 Posted December 23, 2007 Share Posted December 23, 2007 That would explain why I couldnt even find a link to their product. :bigeyes: Link to comment Share on other sites More sharing options...
Oneshot Posted December 23, 2007 Author Share Posted December 23, 2007 Are you saying my computer is OLD? :laughing::laughing::laughing: Hey, dirt is much older :D: Now for the (2) 1 meg chip recomendations? (2700 c2) Thanks in advance. Link to comment Share on other sites More sharing options...
RJLeong65 Posted December 24, 2007 Share Posted December 24, 2007 Are you saying my computer is OLD? :laughing::laughing::laughing: Hey, dirt is much older :D: Now for the (2) 1 meg chip recomendations? (2700 c2) Actually, things change rather rapidly in the computer world. No new system has been using DDR(1) memory in over two years. (And that's not counting Serial ATA/SATA has supplanted IDE as the choice for hard drive interfaces, and that PCI-Express has all but replaced AGP as a graphics card interface.) And there is no PC2700 module in current production which runs at CL2 latency. You could try the TWIN2X2048-3200C2 kit, but you'll have to set the memory timings manually in the BIOS to 2-3-3-5 or 2.5-3-3-5 rather than the standard 2-3-3-6 or 2.5-3-3-6 timings. Otherwise, the only current PC2700 modules which Corsair currently makes is the Value Select VS1GB333 (you will need two of them to get to 2GB), which has a latency rating of CL2.5 (2.5-3-3-7). Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 25, 2007 Corsair Employees Share Posted December 25, 2007 I would just wait till you get a new MB and get a newer faster system. Or I think you might still find VS1GB333 modules that would work with that MB. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.