MSI P35 and TWIN2X2048-6400 timing problem

[squizm]

Hello,

 

I'm trying to adjust the timing of my memory to the following recommended specs:

 

TWIN2X2048-6400 DDR2-800 (5-5-5-12) 2GB Kit (2 x 1GB) 5-5-5-12-2T 1.9

 

I run CPU-Z and it states that the timing is 5-5-5-18 1.8. How do I go about changing this?

[Yellowbeard]

Check your manual for the bios section on memory adjustments. However, if you are currently stable and do not intend to OC, I'd leave the settings where they are.

[squizm]

Thanks for the quick reply, the issue is that the board is giving me troubles. Here is a link to a youtube vid I posted demonstrating the problems I'm having

 

http://www.youtube.com/watch?v=v_u4kJKg8bw

 

As you can see the video drivers are causing a BSOD when attempting to play Hellgate London. Their tech support advised me to check the timing recommended for my memory so here I am. Corair site says 5-5-5-12 1.9 but its currently set at 5-5-5-18 1.8.

[RAM GUY]

Please go to your BIOS setup and load setup defaults and then set the memory Voltage to 2.0 Volts and then set the memory timing to Cas 5-5-5-12 (TCL,TRCD,TRP,TRAS) and then exit the BIOS saving changes and test the system with http://www.memtest.org to make sure its stable and see if that will solve the problem.

[squizm]

Here are the options I have to choose from. None of them match the fields you're talking about. Thanks for your help!

[RAM GUY]

TCL = Cas Latency or 5

TRCD = Ras to Cas Delay or 5

TRP = Ras Percentage or 5

TRAS = Activate to Precharge or 12