vavtnen Posted December 20, 2007 Share Posted December 20, 2007 Striker Extreme wont post it I enable SLI-Ready memory. Also the max speed i can get from the ram is 937mhz. Do i have a bad part? or it's just the max limit for my pc? Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 20, 2007 Corsair Employees Share Posted December 20, 2007 How many modules do you have and did you load setup defaults and set the memory Voltage to 2.4 Volts and set the Command Rate to 2T and then set SLI Ready Memory to CPU Max? Link to comment Share on other sites More sharing options...
vavtnen Posted December 20, 2007 Author Share Posted December 20, 2007 I have 2 modules installed. The mother board wont post if i enable SLI ready. I checked on the mother's board lcd display and it always stop at detecting sdram. Also i have Nautilus500 for cooling the CPU. Link to comment Share on other sites More sharing options...
vavtnen Posted December 20, 2007 Author Share Posted December 20, 2007 Just to make sure, i've just set up extracly like you said, and everything else is set to AUTO, but it still wont POST. If i overclock it manually i can only get to 937mhz Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 20, 2007 Corsair Employees Share Posted December 20, 2007 You might try them one at a time to make sure its not something else but let's try replacing them if not, please use the On Line RMA Request Form and we will be happy to replace them. Link to comment Share on other sites More sharing options...
vavtnen Posted December 20, 2007 Author Share Posted December 20, 2007 uhm so what my set up the ram should be able to run at 1250 speed? i just want to make sure before i replace them. thanks Edit: Do i need to send in the memory modules before i get the replacement? It's because i need to use my pc and i dont have any other ram module for my home pc. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 20, 2007 Corsair Employees Share Posted December 20, 2007 The Quad Core CPU's have not over clocked as well as the Dual core CPU so no it may not reach DDR1250 with that configuration. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.