jellotrack Posted December 19, 2007 Share Posted December 19, 2007 I Just Bought A New Set Of Cosair Dommnator 8500c5 I Have A Mobo Striker Extreme..lowest Model Quad And I Wanna Know How Do I Tweak It To Go At 1066hmz Or My Mobo Dont Support 1066mhz Ram...? Atless Am I Gonna Get The 5-5-5-15 Speed For Having It On At 800mhz? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 19, 2007 Corsair Employees Share Posted December 19, 2007 What is the exact model of your CPU? Link to comment Share on other sites More sharing options...
Wired Posted December 19, 2007 Share Posted December 19, 2007 I think he meant, What is the model of your CPU, and what is the part number of your memory? How To Read the Memory Label Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 20, 2007 Corsair Employees Share Posted December 20, 2007 LOL Yea sorry I did, the model and FSB of the CPU please. :o: Link to comment Share on other sites More sharing options...
jellotrack Posted December 20, 2007 Author Share Posted December 20, 2007 well my model cpu is Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775 Quad-Core Processor Model BX80562Q6600 and my fsb on the system is 1066.64 and my ram model are dominator 2gb 2x1gb ddr2 1066mhz pc2-8500c5 and another question what is the 5-5-5-15? and my frist question..what do i do to get the full power of the ram? Link to comment Share on other sites More sharing options...
jellotrack Posted December 20, 2007 Author Share Posted December 20, 2007 running it on a visit os.64bit Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 20, 2007 Corsair Employees Share Posted December 20, 2007 Please load setup defaults and then set the memory Voltage to 2.1 Volts and with two modules only then set the Command Rate to 2t and set SLI Ready memory to CPU 0% and test the system with http://www.memtest.org with Legacy USB Support Disabled to make sure its stable. Link to comment Share on other sites More sharing options...
jellotrack Posted December 21, 2007 Author Share Posted December 21, 2007 i dont see it in my boi which section is it under in command rate?but i see everything esle... Link to comment Share on other sites More sharing options...
jellotrack Posted December 21, 2007 Author Share Posted December 21, 2007 what do u mean by two modual set only? Link to comment Share on other sites More sharing options...
jellotrack Posted December 21, 2007 Author Share Posted December 21, 2007 with memstest86 do u download and instal it or what?> Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 21, 2007 Corsair Employees Share Posted December 21, 2007 and what do u doq with memstest86 do u download and instal it or what?> A: Where to get Memtest and how to download it? and what do u mean by two modules, one set only? A: Yes just one set of modules only two module will run at those settings, with 4 modules DDR800 or DDR667 would be suggested. i don't see command rate ram guy i don't see it in my BIOS which section is it under in command rate?but i see everything esle... A: Yes it might be called Command Per Clock and normally it will be where the memory timings are set. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.