GizmoSLI Posted December 19, 2007 Share Posted December 19, 2007 Hi, is there a compatibility issues with Striker extreme and pc6400c, e6850? I can never get it stable, with 1 set 2x1GB and of course not with 2 sets, CPU Oc'd or not, reference Voltage +- all the same. have any one faced the same problem? what kind of rams I should go for other than pc6400c? Ty Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 19, 2007 Corsair Employees Share Posted December 19, 2007 With 4 modules DDR667 would be suggested and the memory Voltage should be set to 2.1 Volts and set the 1.2V HT: 1.25v and NB Core Voltage: 1.5v and SB Core Voltage: 1.55v and CPU VTT Voltage: 1.25v Link to comment Share on other sites More sharing options...
GizmoSLI Posted December 20, 2007 Author Share Posted December 20, 2007 What is the Bios version you have tested the pc6400? I am on SE1303 TY Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 20, 2007 Corsair Employees Share Posted December 20, 2007 I would suggest using the latest BIOS version especially if you have a newer core CPU. Please see the Performance Reports on that MB to see what BIOS version we used. Link to comment Share on other sites More sharing options...
GizmoSLI Posted December 20, 2007 Author Share Posted December 20, 2007 the suggestion of voltages did not work with me, I think NB 1.5V is too high you cant even post with this voltage even with WC kit on NB, at least with me! I have tried the 1305 which is the most recent, I will give it another shot, the link you provided is not working with the setup I have, it's not showing any results to me. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 20, 2007 Corsair Employees Share Posted December 20, 2007 With 4 modules DDR667 would be suggested and the memory Voltage should be set to 2.1 Volts and set the 1.2V HT: 1.25v and NB Core Voltage: 1.5v and SB Core Voltage: 1.55v and CPU VTT Voltage: 1.25v The NB Voltage should be 1.25 Volts not 1.5 Volts. And did you test the modules at DDR667 and or test them one set at a time to make sure one is not failing? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.