Jump to content
Corsair Community

Compatibility Twinx1024-3200C2 with others Twinx1024-3200C2


Recommended Posts



I agree with you, my title is quiet strange and not explicit but...


I have buy a Twinx1024-3200C2 (version 1.5) kit in July 2005 and I have only found over eBay :[pouts: the same kit (version 1.5 too).


I would like to put it on a "old" config based on a motherboard Abit An8 Ultra (4 bank memory).


I would like to know, if the wanted kit, witch is the same modele and version, would work in Dual Channel or not.


Joined to this post, a screenshot of the Abit AN8 Ultra manual.


What is the difference between "single rank" and "double rank" ?


Thanks a lot in advance for your attention. :):


Link to comment
Share on other sites

I would suggest just replacing what you have now with one set of Twinx2048-3200C2 modules for best performance, if you install for 512 Meg modules you will be limited to DDR333.


Are you sure of that ?


What happens if I put all ram at DDR 400 ? I simply can't boot ?


Twinx2048-3200C2 cost 170€ (245USD). I have Twinx1024-3200C2 for less than 30€...


Thanks for your attention.

Link to comment
Share on other sites

Hard to say for sure, just have to try it, but most likely it would not be stable with 4 modules at DDR400. But you are welcome to try it if you want to take that risk.


Ok, very thanks for your comment...


I think that I will try but, if it doesn't work, I give it to a friend :)


Do you know if the ram of this kit is in double rank or single rank ?

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...