sileconsoul Posted December 12, 2007 Share Posted December 12, 2007 ASUS P5N-E SLI twin2x2048 6400C4 intel duo e6750 corsair hx520 xfx geforce 8800gts i've set the memory timing to 4-4-4-12-2t i've updated the bios, to 0709 and run memory test, found 200+ errors do i get an rma for the set now? and should i send off for the mail in rebate before i send them back for the rma? or am i just ****ed for the mail in rebate Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 12, 2007 Corsair Employees Share Posted December 12, 2007 Did you set the memory Voltage to 2.1 Volts and did you disable Legacy USB when you ran http://www.memtest.org? And what test did you get errors one with the modules tested one at a time? Link to comment Share on other sites More sharing options...
sileconsoul Posted December 12, 2007 Author Share Posted December 12, 2007 did change the voltage and i ran the memtest with the legacy on. i currently only have a usb keyboard, logitech g15 and im not certain about the memtest because the computer crashed half way. Link to comment Share on other sites More sharing options...
bigbuck08 Posted December 12, 2007 Share Posted December 12, 2007 Turn of USB Legacy Device and try running Memtest again. Link to comment Share on other sites More sharing options...
sileconsoul Posted December 13, 2007 Author Share Posted December 13, 2007 turned off the legacy did the memtest no errors up until 94% of the first pass, and then the computer simply shut off. on stick #1 stick #2 simply wont load bios Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 13, 2007 Corsair Employees Share Posted December 13, 2007 If the system is just turning off that might suggest a Thermal or Voltage problem and I would suggest testing them in another system. Link to comment Share on other sites More sharing options...
sileconsoul Posted December 13, 2007 Author Share Posted December 13, 2007 it was a thermal problem, temp solved it ran 2 passes on the first stick with no errors. second stick simply wont load bios. i get a blue screen when loading xp with the first stick of ram Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 13, 2007 Corsair Employees Share Posted December 13, 2007 Let's get them replaced, please use the On Line RMA Request Form and we will be happy to replace them. Link to comment Share on other sites More sharing options...
sileconsoul Posted December 13, 2007 Author Share Posted December 13, 2007 is the upc code needed for the rma? i need it for the mail in rebate. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 13, 2007 Corsair Employees Share Posted December 13, 2007 No just use the plastic package to protect them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.