CSphix Posted December 6, 2007 Share Posted December 6, 2007 hello i'm newbie from italy the question regarding the correct value of timings and voltage in Asus p5wdg2-pro with intel e6850 ( 3 Ghz 1333Mhz ) of my 2 2xcm2x1024-6400c4 v2.1 ddr2 , now i'm running 5-5-5-15-21 -volt 1,9 at 444 Mhz ..are this parameters correct ( the system recognized the ram :pc7400 ??? ) if i imput "auto " in spd ram parameter the system boot with pc3200 value ....ther's some tech table to read for increase the value of ram and his voltage to min or max for this DDR2? tnx :o: Link to comment Share on other sites More sharing options...
Wired Posted December 6, 2007 Share Posted December 6, 2007 Next time, please check the FAQ forum first :) XMS Qualification and Testing thread Testing parameters for Twinx/XMS2-6400C4: Twin2x2048-6400C4 Data Sheet Motherboard make and model: Asus P5WD2 or M2N32-SLI Premium/Deluxe Each pair is tested and packaged together using the following settings: AI Over Clock Tuner: Manual CPU External Frequency: Manually set to 200MHz DDR2 SDRAM Clock: Manually set to 800MHz PCI Express Freq: Auto PCI Freq: 33.33 Performance Mode: Standard DRAM Timing Selectable: Manual SDRAM CAS Latency: 4T SDRAM RAS to CAS Delay (tRCD): 4T SDRAM Row Precharge (tRP): 4T SDRAM Active to Precharge Delay (tRAS): 12T SDRAM Write Recovery Time: 5 Write to Precharge Delay: 15 (If it's Listed) Command Rate: 2T DDR2 SDRAM Voltage: 2.1 Advanced voltage control CPU Vcore offset:_Disabled DDR2 Termination: 0.5x CPU to NB HT:____1.200V NB to SB HT:_____AUTO NB Core/PCI-E:___AUTO SB Core/PCI-E:___AUTO SB Standby core:_+1.500V Output driver control CKE:______AUTO CS/ODT:__1.00X ADD/CMD:_1.00X MEMCLK:__1.00X Chipset Core Voltage: Auto All other settings are motherboard defaults. Maximum DDR2 recommended VDIMM: 2.1 Volts Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.