eae1965 Posted December 1, 2007 Share Posted December 1, 2007 My new 1 GB Memory (2x 512mb) Modules arrived today. However after installing them, my computer will not fully start. It tries kind of a lugging start but doesn't fully "catch". When I removed one of the modules (and left the other in) it ran just fine. What's the problem here? Link to comment Share on other sites More sharing options...
bigbuck08 Posted December 1, 2007 Share Posted December 1, 2007 Im assuming one of the modules is bad but to make sure test with Memtest. Go here, http://www.memtest.org/ . Download Memtest and burn the ISO image to disc. Load BIOS defaults and boot from the CD. Let it run for atleast two passes. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 3, 2007 Corsair Employees Share Posted December 3, 2007 Can you tell me our modules part# (How To Read the Memory Label) and the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.