reifen Posted November 30, 2007 Share Posted November 30, 2007 What cable should I use? Nothing coming out the psu matches only the cables for the drives Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 30, 2007 Corsair Employees Share Posted November 30, 2007 That is a molex connector and you should have a few modular molex cables included with the PSU. You may want to check your motherboard manual, as usually it is not necessary to use this connection unless you are using multiple video cards. Link to comment Share on other sites More sharing options...
reifen Posted November 30, 2007 Author Share Posted November 30, 2007 can i use something like this ? http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=186&products_id=21141 and where i can get long cables copatible with my psu if I need? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 1, 2007 Corsair Employees Share Posted December 1, 2007 You should use one of the 4-pin peripheral connectors included with the PSU. The end that plugs into the PSU is 5x1-pin and the end that plugs into the board is 4x1-pins. Link to comment Share on other sites More sharing options...
reifen Posted December 1, 2007 Author Share Posted December 1, 2007 I will try thank you Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.