McAttack Posted November 21, 2007 Share Posted November 21, 2007 Hey hows it goin? Motherboard: Fatal1ty Fp-in9 Memory. Corsair cm2x1024-6400 5-5-5-12 1.90v 800Mhz version 5.2 In the system BIOS the message, "Sli ready memory - not Detected" is displayed I havnt changed any of the Voltages or anything yet, And would like help as to what changes i should make? Please get back to me ASAP, Thanx:eek::eek: Link to comment Share on other sites More sharing options...
DerekT Posted November 21, 2007 Share Posted November 21, 2007 Your DRAM is not SLi memory. This just means that the memory has to set manually. Your DRAM at 5-5-5-12 with 1.9v is set correctly. You can download memtest from http://www.memtest.org. Extract the ISO image and burn the Image to a CD. Boot to the CD and allow for two full passes to test the stability. Results? Link to comment Share on other sites More sharing options...
McAttack Posted November 21, 2007 Author Share Posted November 21, 2007 will inform u of results ;) WHAT Is Sli memory then? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 21, 2007 Corsair Employees Share Posted November 21, 2007 SLi-Ready Memory/Enhanced Performance Profiles Overview Link to comment Share on other sites More sharing options...
DerekT Posted November 21, 2007 Share Posted November 21, 2007 SLi Memory and EPP (Extended Performance Profiles) allows for advanced performance memory settings beyond the JEDEC standard settings. SLi Memory allows you to set to automatic and the DRAM extended settings will be read by the BIOS and will set the proper settings. Otherwise you have to set them manually. There is no difference in the DRAM itself. Link to comment Share on other sites More sharing options...
McAttack Posted November 21, 2007 Author Share Posted November 21, 2007 So What must i do? Do I have to buy sli ready memory? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 21, 2007 Corsair Employees Share Posted November 21, 2007 Just set the timings manually and no your memory is not SLI Ready. Link to comment Share on other sites More sharing options...
McAttack Posted November 21, 2007 Author Share Posted November 21, 2007 Can you verify the timings again with me? Because when i tried to Change the times before, the same error message appeared after i rebooted. Is My Motherboard Compatable with Non Sli Memory? "Fatal1ty fp-in9 sli" Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 21, 2007 Corsair Employees Share Posted November 21, 2007 Dram Voltage: 2.0 Volts SDRAM CAS Latency: 5T SDRAM RAS to CAS Delay (tRCD): 5T SDRAM Row Precharge (tRP): 5T SDRAM Active to Precharge Delay (tRAS): 15T Command Rate: 2T SDRAM TRC: 24-28 Link to comment Share on other sites More sharing options...
McAttack Posted November 21, 2007 Author Share Posted November 21, 2007 :D:Thanks, Changed the relavent times etc, Gona try install my Os now, Will get back to you if iv further problems nvolving ram Thanks! :cool::cool::D::D: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 21, 2007 Corsair Employees Share Posted November 21, 2007 NP Please let us know, and if you get an error I would check the stop error code at http://www.microsoft.com/technet. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.