Jump to content
Corsair Community

why VS2GB667D2 G X 4PCS doesn't work with intel Desktop Board DP35DP?


silver5660

Recommended Posts

why VS2GB667D2 G X 4PCS doesn't work with intel Desktop Board DP35DP?the bios boot screen doesnt start.

 

when I use 2gb x 2pcs, I can start my pc and boot into window without problems.

 

when install more than 4GB, the pc doesnt see the bios start screen and not display on LCD??

 

how to solve this problem? I already buy VS2GB667D2 G 2GB x 4pcs, how to make them work together with my pc?

 

my pc spec is:

 

Intel Core 2 Quad 6700 2.66Ghz 1066MHz

Intel Desktop Board DP35DP

VS2GB667D2 G X 4PCS

Gigabyte 8600GT 512MB 128Bit

hitachi 160GB SATA HDD

Icute Power Supply 450W

Link to comment
Share on other sites

Your board may not wish to run with 8GB.

 

Download memtest from http://www.memtest.org and extract the ISO image.

Burn the ISO image to an CD-ROM disk.

Install two sticks in Dimm Slots 1 & 3 and boot to the optical drive with the memtest disk and allow for two full passes.

Remove the first two sticks and insert the second two sticks.

Repeat the memtest with the other two sticks.

 

Results?

Link to comment
Share on other sites

memtest can change the ddr frequency??

I test in a gigabytes motherboard 965p chipset, can run 8GB properly and load window xp properly.........

is it the intel mainboard with DP35DP chipset problem?

 

No. Memtest just tests the memory. I was asking you to set to two sticks to 667Mhz and stock cpu and then test with memtest. Remove the two sticks and test with the next two sticks. I would think that you will find that the DRAM is fine.

 

Yes, I believe that your board is holding you back. Not the chipset but the Intel motherboard. They are notoriously finicky with DRAM and you have the proper DRAM for that board. I stay away from Intel motherboards personally.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...