Jump to content
Corsair Community

Striker + Q6850 + 4 x 1gb CM2X1024-6400 (stable?)


Recommended Posts

I've been searching forums and testing with memtest86+ until I found the settings that report no errors.

THIS THREAD had the combination that finally worked for me.



*MEM/DDR: 533

*Mem Volts: 2.1v


I was just wonder if I needed to worry about any other voltage settings or if any of you really smart people (DerekT, RAMGUY) do not believe these settings "are my final answer".


Cooler Master CM Stacker 830 Evo

Cooler Master Blue LED Silent Fan 120mm x8

Cooler Master Realpower 1000w

Asus Striker Extreme

Intel® Core2 Extreme CPU Q6850 @ 3.00GHz

Corsair CM2X1024-6400 G 4gb

WD Raptor 150gb 10,000rpm x5 - Raid5

e-GeForce 8800GTX 768MB KO ACS3


Other Settings of interest for people searching the forum:

AI Tune: Manual

System Clocks: All Defaults

FSB/QDR: 1333

Cpu Mult: 9

Memory Timing: All Defaults (auto detect seems to set 2t - I'll need to confirm on next boot, if anyone needs to know)

Spread Spectrum: CPU / SATA Disabled

USB Legacy: Disabled

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...