poison Posted November 12, 2007 Share Posted November 12, 2007 Hi ^^ After installing a Corsair VX450W all my hard drives began vibrating so hard I first thought I had a cable hanging into a fan somewhere =/ Going back to the old PSU made it disappear. I reinstalled the VX450W in the meantime, and after a few hours of operation the vibration got a bit less and is only audible every once in a while (but the HD's are still operating a lot noisier than with the old PSU). It just doesn't seem right, could it be the device has a defect? PS: the max power draw is 230W, so I doubt it's overloaded. PPS: Please excuse my english =) Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted November 19, 2007 Corsair Employee Share Posted November 19, 2007 I would recommend that you update to the latest BIOS available for your board, and then load setup defaults and see if the problems persist. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.