Jump to content
Corsair Community

Dominator 8500C5D and Striker Extreme - NO BOOT!!!


Recommended Posts


my Striker Extreme can't boot with Corsair Dominator 8500C5D. Tryed using another ram to boot and enter BIOS to change voltage. Changed to 2.1, then 2.2 and 2.3v but when I plugged back the Corsair my pc don't boot.


What are the right configs for my ram to make my mobo works with it?



-> Corsair Dominator TWIN2X1024Gb 8500C5D 5-5-5-18 2.1v Ver2.2


ps: sorry for my bad english

Link to comment
Share on other sites


i have already the latest BIOS for my Striker Extreme (version 1035). After starting my system with another ram, the system loaded and I get in to BIOS. Set the "default" configuration then changed the RAM VOLTAGE (or something like that) to 2.1v. Restarted and changed the module to Corsair Dominator. Started my pc but nothing. Black screen with no bips or messages. Changed the modulo again and tested with 2.2 and 2.3v but nothing. In another try changed the timings to 5-5-5-18 but nothing at all.


I've tested my ram with another computer with different mobo and it started just fine.



Link to comment
Share on other sites

  • Corsair Employees

i can't boot with corsair modules. just with another ram like king****...

when i plugged back the corsair module i get no boot. even with one or two sticks.


Have you completely cleared the CMOS since you flashed the bios?

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...