Jump to content
Corsair Community

TWINX1024-3200LLPRO w/ Gigabyte 8KNXP, no overclock


cracker_jax

Recommended Posts

I'm trying to get my modules to run at the rated CL2 but the best I can boot with is 2.5, which is what the bios defaults the sticks to. At 2-3-2-6 the WinXP bootup screen comes up but just before I enter the GUI it restarts. The dual DDR400 is behaving nicely though. Any thoughts? ----- Specs Antec TruePower 430 Intel 3.2Ghz HT Gigabyte 8KNPX (never heard of a v2) Matrox Parhelia 3HD, 3optical, and a conservative watercooling system
Link to comment
Share on other sites

  • Corsair Employees
I am sorry you are having trouble with our memory, but this problem has been reported to Giga-Byte as we have seen the same issue with a few of their MB's. They will just not run correctly when you set the timings manually. But I am not sure this model has that same issue. I would test the modules on another MB if at all possible as that would help to isolate the problem.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...