Jump to content
Corsair Community

Asus M2A-VM


DarkAuraXI

Recommended Posts

i recently got a new setup on a sweet gaming system, but for some reason it wont boot up, i keep getting 1 long beep, and 2 short beeps.i find it odd because on the PDF file for the motherboard i have everything correct but it still seems to crash even before something is on the screen. what do i do?

 

Asus M2A-VM (aka V3-M2A690G)

Corsair XMS2TWIN 2048-6400C4

XFX Geforce 8600GTS

250gig HD SATA

AMDX2 4800+

Asus Delta 300w

 

Please if someone can help me out, i would be great full.

Link to comment
Share on other sites

Do you have a plain stick of DDR2. Just a value piece. You need to install a plain stick and enter the BIOS. Then set your DRAM Voltage (Vdimm) to 2.1v. Then shut the system down and remove the plain stick and install the higher end C4's. Restart and enter the BIOS. Set the Timings to 4-4-4-12 and reboot.

 

Download memtest from http://www.memtest.org and extract the ISO image. Burn the ISO image to an CD-ROM disk. Boot to the optical drive with the memtest disk and allow for two full passes.

 

Results?

Link to comment
Share on other sites

  • Corsair Employees
I would recommend testing each stick individually. If you can get into the BIOS with one of the modules, adjust the memory voltage to 2.1 volts and then attempt them both in dual channel once more. If you do not have a voltage adjustment with this board, these modules may not be compatible.
Link to comment
Share on other sites

At the moment buying another set of DDR2 ram is out of the questing because this is my Third set. i thought there was something wrong with the ram. regardless im changing my motherboard to an M2N-X. its compatible with my ram, pluss i heard its better. this is going to be my set up now, tell me if this is good for next gen.

 

M2N-X

Corsair Twin2048-6400C4

AMDX2 4800+

Nvidia Geforce 8600GTS

Western Digital SATA 250 GB

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...