Jump to content
Corsair Community

Aopen AK89 Max Issues


Midnyter

Recommended Posts

I've been trying to install windows on this motherboard and keep running into either freezing or physical memory dumps. I talked to Aopen's tech support and said that it wasn't the board, but more than likely the settings with the RAM. I'm running 3 sticks of XMS 3200 512mb each. The tech support said I'd have to get DDR voltage setting and the other four timings from Corsair as well. Thanks for the feedback in advance.
Link to comment
Share on other sites

  • Corsair Employees
I am surprised that they did not tell you this, but with socket 754 and more than 2 modules you would need to run the memory at DDR333 or DDR266, please check the documentation for your MB, or if they did not list it please look at the Spec for the CPU you have as the memory controller is in the CPU with AMD64 CPU's [URL=http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/24659.PDF]AMD 64 White Paper[/URL]
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...