humaxnet Posted November 7, 2007 Share Posted November 7, 2007 I've motherboard ASUS P5N32-E SLI Plus and 4Gb of TWIN2X2048-8500C5D. I use Intel Core 2 Duo E6850 processor and SLI video NVidia 8600GTS. How can i use four module (4 Gb) of TWIN2X2048-8500C5D in stable mode? If they must work at 800 Mhz, what are correct voltage and latency? If they must work at 667 Mhz, what are correct voltage and latency? Regards Humaxnet Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 7, 2007 Corsair Employees Share Posted November 7, 2007 Please set your memory voltage to 2.1v and the memory speed to 667mhz. You can set the latencies manually to 5,5,5,15 and command rate to 2T. Link to comment Share on other sites More sharing options...
humaxnet Posted November 7, 2007 Author Share Posted November 7, 2007 TX for rapid answer, i'll try it! Humaxnet Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 7, 2007 Corsair Employees Share Posted November 7, 2007 Let us know how it works out! Link to comment Share on other sites More sharing options...
humaxnet Posted November 10, 2007 Author Share Posted November 10, 2007 OK, it works like a charme!!! Cheers Humaxnet :D::D::D: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.