doon65 Posted November 4, 2007 Share Posted November 4, 2007 been wondering what to do ive 2 sets of twinned 1 gb xms2 cm2x512a 6400 and a abit an9 32x fatality board .if i use 2 sticks in the dual channel slots fine alls well in abit land its when i plug ion the other 2 sticks to up it 2 2 gb dual channel the fun begins non working mobo wont post no matter what combination what stick is used no comply. Link to comment Share on other sites More sharing options...
fatalheadache Posted February 26, 2008 Share Posted February 26, 2008 I had four up in my rig before are all your dram timings set to what has been tested? Are all the sticks trouble free have you tested each one? I know sounds like much testing but you need to be sure they are fine. Could be you have a setting wrong. :confused: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 26, 2008 Corsair Employees Share Posted February 26, 2008 Please make sure that you have the latest BIOS for your motherboard and then load optimized defaults and set the Memory Voltage to 1.9 volts and then set the timings to 5-5-5-12 (CAS-tRCD-tRP-tRAS) and then test the modules one at a time with http://www.memtest.org! Please allow memtest to run 2-3 passes on each module. If you still get errors, we will be happy to replace them! However, if you get errors with multiple modules that would suggest some other problem and I would test them in another system or MB to be sure. If all the modules pass individually then I would recommend setting the memory frequency to DDR667 to see if the system becomes stable with 4 modules installed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.