mee Posted November 2, 2007 Share Posted November 2, 2007 I just got Corsair XMS2 twin2x2048-6400 (a pair of CM2X1024-6400 ) from Frys. They specified that the specs were 5-5-5-12-1t @ 1.9v. The problem is for my system to be stable i am having to run it at 2.1v. Will this void my lifetime warranty? Thank you Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 2, 2007 Corsair Employees Share Posted November 2, 2007 This should not void your warranty, however these modules should be stable at 1.9volts. I would recommend that you make sure that you have the latest BIOS for your motherboard and then load optimized defaults and set the Memory Voltage to 1.9 volts and then set the timings to 5-5-5-12 (CAS-tRCD-tRP-tRAS) and then test the modules one at a time with http://www.memtest.org! If you are getting errors on both modules there may be some other issue, however if one passes and the other fails then we would have no problem replacing them for you. Link to comment Share on other sites More sharing options...
mee Posted November 2, 2007 Author Share Posted November 2, 2007 thank you for the quick response! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 2, 2007 Corsair Employees Share Posted November 2, 2007 NP Please let us know if you have any more questions! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.