Vasille Posted November 1, 2007 Share Posted November 1, 2007 I have following rams at hand: 1.CORSAIR XMS2 DOMINATOR 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) 2.CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Question is, that I have Asus mobo P5N32-SLI and I'm wondering if I can hook up all these ram, total of 4GB and have a working computer, if I can, what's the best setup? :confused: I'm very new to computer customization but please anyone, let me know if you have any knowledge of this problem I'm having.:biggrin: Thank You! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 1, 2007 Corsair Employees Share Posted November 1, 2007 Can you tell me our modules part# (How To Read the Memory Label) Should be like Twin2x2048-6400 if its the same for both modules then yes and with that MB just set the memory frequency at DDR667 at 2.0 Volts and set the command Rate to 2t and you should be good to go, but load setup default before you make the changes. Link to comment Share on other sites More sharing options...
Vasille Posted November 1, 2007 Author Share Posted November 1, 2007 1. CM2X1024-6400C4D / XMS6404v2.1 / 0643019-3 2. CM2X1024-6400C4 / XMS640v1.2 / 0617082-3 This is what I have 2 of each.....can you let me know..how to setup my computer and settings so that I won't have any errors? Can you give me step by step on configuration? Thank You Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 2, 2007 Corsair Employees Share Posted November 2, 2007 Yes just load setup defaults and then set the memory Voltage to 2.0 Volts at DDR667 and you should be good to go. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.