maska Posted October 31, 2007 Share Posted October 31, 2007 Hello! My system is composed by: MB: ASUS STRIKER EXTREME CPU: INTEL Q6600 VIDEO CARD: ASUS GEFORCE8800 GTX RAM: TWIN2X2048-8500C5D (2Gbit) Can you tell me the best configuration for using my dimms at the best? (Sorry my english isn't very perfect.. :D ) Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 31, 2007 Corsair Employees Share Posted October 31, 2007 Yes just please make sure that you have the latest Bios version and then load setup/optimized defaults and set the Dim Voltage to 2.1 volts and then set SLI Ready Memory to CPU 0% and set the CPC/CR to 2T, then test with http://www.memtest.org! and you should be good to go. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test Link to comment Share on other sites More sharing options...
maska Posted November 1, 2007 Author Share Posted November 1, 2007 Have I to change also the frequency and timing options? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 1, 2007 Corsair Employees Share Posted November 1, 2007 If you only have one set of modules that is all you need to do! Link to comment Share on other sites More sharing options...
maska Posted November 2, 2007 Author Share Posted November 2, 2007 Sorry but my modules starts correctly if I manually set 5-5-5-15, 1066mhz at 2.2V with sli memory disabled if I set my motherboard as you say when my system loads windows vista home premium a see the blue screen error... Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 2, 2007 Corsair Employees Share Posted November 2, 2007 If its running properly with the settings set manually then that is what I would use and wait for the next BIOS release. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.