Jump to content
Corsair Community

Dell


orange12

Recommended Posts

Hi, I was recently given a Dell 4600 (P4 865 3.06Ghz) set for DDR. I bought 512 (2x256) TWINX-XMS 3700 DDR memory. At the moment all it does is beep a few times and fail to boot. Can anyone tell me if anything else is needed to set this up? Cheers
Link to comment
Share on other sites

  • Corsair Employees
Your system may not be able to support these modules, but I would use the memory that came with your system and get the latest bios or firmware and then load setups defaults and see if the system will post with our modules installed. If not please try and reset the MB bios by removing the system power and battery for about 10 Min. Also you will need to be running an 800FSB CPU in order to support these modules. I am sorry but they will not support any speed less that DDR400 and with this MB or system you need an 800FSB CPU to run DDR400.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...