Ashlar Posted October 19, 2007 Author Share Posted October 19, 2007 Cant seem to get this ram to work in this box to save my life. Can you recommend any configurations for the aforementioned RAM to work without sending me to the BSOD with PAGE_FAULT_IN_NONPAGED_AREA? Many thanks for your help and time. How do I even tell what the exact model number is? Link to comment Share on other sites More sharing options...
Ashlar Posted October 19, 2007 Share Posted October 19, 2007 Cant seem to get this ram to work in this box to save my life. Can you recommend any configurations for the aforementioned RAM to work without sending me to the BSOD with PAGE_FAULT_IN_NONPAGED_AREA? Many thanks for your help and time. How do I even tell what the exact model number is? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 19, 2007 Corsair Employees Share Posted October 19, 2007 Please make sure that you have the latest Bios version and then load setup/optimized defaults and set the Dim Voltage to 2.0 volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test. The model number is Twin2x1024-6400. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 19, 2007 Corsair Employees Share Posted October 19, 2007 Please make sure that you have the latest Bios version and then load setup/optimized defaults and set the Dim Voltage to 2.0 volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test. The model number is Twin2x1024-6400. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.