Parente Posted October 16, 2007 Share Posted October 16, 2007 hello this is my first post i bought ASUS mobo STRIKER EXTREME when i finally was able to launch 2 sticks (2x1gb) i cant make them work on 800mhz bus only on 667 (unlinked) if it was on auto they were detecting on 800mhz but system was very unstable and sometimes didnt work at all any sugestions ? i would really like to launch this sticks on their default settins 800mhz thx ps almost forgot im running those memmories on 4-4-4-12 timings sli ready disabled voltage i think 2.0 Nb Voltage 1.4 (i took that from other post bcss before that memmory problems was much much worse (blue screens etc) Link to comment Share on other sites More sharing options...
DerekT Posted October 16, 2007 Share Posted October 16, 2007 You will very likely need to raise your Vdimm to access the 4-4-4-12 @800Mhz timings. Enter your BIOS and set your board as per: Multiplier = 9 FSB = 333 DRAM = Unlinked and set to 800Mhz Memory Timing FSB - Memory Clock Mode: Unlinked CPU FSB: 333 CPU Multi: 9 DDR FSB: 800 tCL: 4 tRCD: 4 tRP: 4 tRAS: 12 Advanced Memory Settings tRRD: Auto tRC: Auto tWR: Auto tWTR: Auto tREF: Auto Async Latency: Auto CMD: 2T CPU Spread Spectrum: Enabled PCIE Spread Spectrum: Enabled MCP PCIE Spread Spectrum: Enabled SATA Spread Spectrum: Enabled LDT Spread Spectrum: Enabled CPU Internal Thermal Control: Enabled Limit CPUID MaxVal: Enabled Enhanced C1 (C1E): Enabled Execute Disable Bit: Enabled Virtualization Technology: Enabled Enhanced Intel Speedstep Tech: Enabled LDT Frequency: 5x PCIEX16_1 Frequency (Mhz): AUTO PCIEX16_2 Frequency (Mhz): AUTO PCIEX16_3 Frequency (Mhz): AUTO SPP<->MCP Ref Clock, Mhz: AUTO Voltages Vcore = AUTO Vdimm (DRAM Voltage) = 2.1v 1.2v HT: AUTO NB Vcore: AUTO SB Vcore: AUTO CPU VTT: AUTO Results? Link to comment Share on other sites More sharing options...
Parente Posted October 16, 2007 Author Share Posted October 16, 2007 thx for answer right now im at work so i wont test it but tommorow morning i will do as u posted and i will get back here with results :sunglasse Link to comment Share on other sites More sharing options...
DerekT Posted October 16, 2007 Share Posted October 16, 2007 thx for answer right now im at work so i wont test it but tommorow morning i will do as u posted and i will get back here with results :sunglasse Sure thing. Please let us know how it goes... Link to comment Share on other sites More sharing options...
Parente Posted October 17, 2007 Author Share Posted October 17, 2007 hey i didnt tested thse settings bcss my mobo didnt boot at all today , after few restarts it booted but hangs in bios settings , soo i took the screwdriver , and replaced asus striker with my old Gigabyte 965p ds4 , Corsair ram works great and autodetect at fabric settings with 800mhz bus , for the last time never again asus , sry striker extreme just dissapointed me . thx for help anyway Link to comment Share on other sites More sharing options...
DerekT Posted October 17, 2007 Share Posted October 17, 2007 hey i didnt tested thse settings bcss my mobo didnt boot at all today , after few restarts it booted but hangs in bios settings , soo i took the screwdriver , and replaced asus striker with my old Gigabyte 965p ds4 , Corsair ram works great and autodetect at fabric settings with 800mhz bus , for the last time never again asus , sry striker extreme just dissapointed me . thx for help anyway Sure thing. I understand your feelings. I was and still am not impressed with 680i and although the Striker was (in my opinion) the best of the bunch, it still is far more problematic than Intel based chipsets for Intel CPU's. The ability to unlink the CPU <--> DRAM is a plus certainly and for some, the SLi might be worthwhile but other than that, it is very hot and somewhat idiosyncratic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.