flupke Posted October 13, 2007 Share Posted October 13, 2007 I'm having trouble installing an operating system on my new hardware. Tried XP Pro and Vista Home Premium. XP hangs when configuring network. Vista hangs during the expansion of files around 32%. Have updated Bios to latest for MB. Asus P5N-E SLI Twin2x2048-8500C5D G XFX 8500 GT video ran memtest86+ so far 10 errors on test 5: example 179.0MB failing address, fffdffff good, 0002000 bad, ffffffff err-bits, 1 count Any suggestions would be appreciated, Thanks Link to comment Share on other sites More sharing options...
antipacker Posted October 13, 2007 Share Posted October 13, 2007 yep sounds like a memory fault m8 try just one stick at a time or change ram settings in bios to spd if not already Link to comment Share on other sites More sharing options...
flupke Posted October 13, 2007 Author Share Posted October 13, 2007 Even memtest freezes up twice now on test #8. Hitting esc or c has no result pc totally froozen. 10 errors after 2 passes in both modules. Link to comment Share on other sites More sharing options...
DerekT Posted October 13, 2007 Share Posted October 13, 2007 What voltage are you setting for the 8500C5's? What version is on the modules? Link to comment Share on other sites More sharing options...
flupke Posted October 14, 2007 Author Share Posted October 14, 2007 I have them setyp as 5-5-5-15-2T voltage 2.178 running at 800 Mhz The version on the modules is 2.2 Thanks Link to comment Share on other sites More sharing options...
flupke Posted October 14, 2007 Author Share Posted October 14, 2007 I have them setyp as 5-5-5-15-2T voltage 2.178 running at 800 Mhz The version on the modules is 2.2 Thanks Link to comment Share on other sites More sharing options...
DerekT Posted October 14, 2007 Share Posted October 14, 2007 Did you try what antipacker said. Test each of the modules singly. Results? Link to comment Share on other sites More sharing options...
DerekT Posted October 14, 2007 Share Posted October 14, 2007 Did you try what antipacker said. Test each of the modules singly. Results? Link to comment Share on other sites More sharing options...
flupke Posted October 16, 2007 Author Share Posted October 16, 2007 I downgraded my bios to the next to last version from Asus and the system was a whole lot more stable. I was able to install XP pro on it and do all updates and install all the drivers. The system still locks up randomly maybe once every 4 hours or so, and not under stress. For example just opening IE and going to a web site. Won't have much time to work on this until the week-end but any additional help is appreciated. Will try with one stick at the time. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 16, 2007 Corsair Employees Share Posted October 16, 2007 I would try and set the memory Frequency at DDR800 and see if it still locks up? Also check on hardware monitor and see what it is setting the CPU VCore to! Link to comment Share on other sites More sharing options...
flupke Posted October 16, 2007 Author Share Posted October 16, 2007 The memory is set to 800 MHZ and the Vcore voltage on the cpu is 1.34V Thanks Link to comment Share on other sites More sharing options...
DerekT Posted October 16, 2007 Share Posted October 16, 2007 Will try with one stick at the time.Have you tested each stick singly yet?? Link to comment Share on other sites More sharing options...
flupke Posted October 16, 2007 Author Share Posted October 16, 2007 I am testing with 1 mem stick ats we speak. Testing the 1st one. So far no lockups. Will let you know what happens. Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 16, 2007 Corsair Employees Share Posted October 16, 2007 Yes please do let us know and you have the memory Voltage set to 2.2 Volts correct? Link to comment Share on other sites More sharing options...
flupke Posted October 16, 2007 Author Share Posted October 16, 2007 Voltage set at 2.178volt I assume that is 2.2volt rounded up? Link to comment Share on other sites More sharing options...
DerekT Posted October 16, 2007 Share Posted October 16, 2007 Voltage set at 2.178volt I assume that is 2.2volt rounded up?Yes, you are correct. Link to comment Share on other sites More sharing options...
flupke Posted October 17, 2007 Author Share Posted October 17, 2007 I was able to run last night for 6 hours without any freezes using one stick in slot b1(Asus recommended testing it with one stick in B1). I will try the other stick of mem tonight and see what happens. Thanks Link to comment Share on other sites More sharing options...
flupke Posted October 17, 2007 Author Share Posted October 17, 2007 I replaced the single stick with the other one and am now using the system with 1 gb installed still in B1. System seems stable with the other memory module. Will let you know status. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 17, 2007 Corsair Employees Share Posted October 17, 2007 Please do let us know. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 17, 2007 Corsair Employees Share Posted October 17, 2007 Please do let us know. Link to comment Share on other sites More sharing options...
flupke Posted October 18, 2007 Author Share Posted October 18, 2007 I seem to have a pretty stable system as long as I only have one module installed in B1. Hope that tell us something. What do I do now to get both working. Thanks Link to comment Share on other sites More sharing options...
flupke Posted October 18, 2007 Author Share Posted October 18, 2007 I seem to have a pretty stable system as long as I only have one module installed in B1. Hope that tell us something. What do I do now to get both working. Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 18, 2007 Corsair Employees Share Posted October 18, 2007 Do you have the latest BIOS installed and did you load setup defaults and set the tested settings manually? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 18, 2007 Corsair Employees Share Posted October 18, 2007 Do you have the latest BIOS installed and did you load setup defaults and set the tested settings manually? Link to comment Share on other sites More sharing options...
flupke Posted October 18, 2007 Author Share Posted October 18, 2007 I have the latest bios 0608 The latest dated 0703 doesn't work at all Can't even install OS. I have mem set at 5 5 5 15 2t all the rest default 800 MHz bus speed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.