Weez Posted March 1, 2004 Share Posted March 1, 2004 ok ive tried single dimm and both dimms in the board and all i get is a rapid beep. i rma'd the board thinking the board was bad and the new board gives me the exact same rapid beeping. Board boots fine with ddr333 and idea where to start looking? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 1, 2004 Corsair Employees Share Posted March 1, 2004 I am sorry but the MB you have will not support registered memory, please ask your reseller if you can exchange this module for CM64SD512-3200 for this MB. Link to comment Share on other sites More sharing options...
Weez Posted March 1, 2004 Author Share Posted March 1, 2004 [quote name='RAM GUY']I am sorry but the MB you have will not support registered memory, please ask your reseller if you can exchange this module for CM64SD512-3200 for this MB.[/QUOTE] heh, not the answer i wanted but at least i know why it wont boot :(: thanks RAM GUY Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 1, 2004 Corsair Employees Share Posted March 1, 2004 I am sorry about that! However, this is a chipset limitation. Sorry! Link to comment Share on other sites More sharing options...
Weez Posted March 1, 2004 Author Share Posted March 1, 2004 [quote name='RAM GUY']I am sorry about that! However, this is a chipset limitation. Sorry![/QUOTE] BTW: what would the twinx applicable product # be? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 1, 2004 Corsair Employees Share Posted March 1, 2004 Should be the same, but just with no "R" or "RE" in the part#, like Twinx1024-3200C2 or Twinx1024-3200LL! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.