gmstrowabarton Posted October 6, 2007 Share Posted October 6, 2007 computer specs: AMD Athlon 3200+ MSI KT880-Delta Ultra X-2 550W ATI Radeon 9600 128MB AGP TWINX2048 XMS-3200C2 v2.75 I just had replaced the ram almost 4months to the day with you it was working until last night I don't overclock I don't even strain my system. I just restarted my computer last night and when it went to boot up I got a BSOD so I went to try and reinstall windows it would freeze just trying to install the basic files for the setup. So I tried to do memtest with a bootable cd it goes through the first quick test then freezes. Now if I try to put just one stick in at a time the system doesn't even post so I can't even memtest the modules by themselves. I have tried the memory in another computer I have that the ram has worked in before and one module works and I can memtest it but the other wont even let the system post right now I have put them both in the computer with the one that can post in simm1 and the other in simm2 if they are switched they don't boot in the system. Right now I have memtest going on the other computer with both stick in it. Now I have installed some older ram into my computer that isn't dual channel and is only 266MHz and my system boots up fine infact I am using it right to write this up now. I have also started a case with the tech express and that number is 274666 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 8, 2007 Corsair Employees Share Posted October 8, 2007 Let's get them or it replaced. Please follow the link in my signature “I think I have a bad part! Or “Tech Support Express” and we will be happy to replace them or it, please note that you are posting from the forum! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.