Jump to content
Corsair Community

compatibility between 6400c4d and 6400c4dhx


yumbolt

Recommended Posts

hi ram guys

ive just recieve a 2gb of 6400c4dhx against broken 2gb 6400c4 dominator

but the problem i already have a 2gb of dominator and when im put the new 6400c4dhx i have a bluescreen and is not possible to boot windows vista ,is it possible the 6400dominator is not compatible with 6400dhx my mother board is p5n32-e sli ,after the bluescreen im checking with memtest my 2gb of dominator and no problem im checking my voltage and latency and all is correct i dont know what is the problem

Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest Bios version and then load setup/optimized defaults and set the Dim Voltage to 2.1 volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...