kem11 Posted September 18, 2007 Share Posted September 18, 2007 Hey, i just built a computer.. Gigbyte DS3L 450VX powersupply 250gb hdd E4400 and a Antec P182SE and when i hit the power button the cpu/psu fans spin for 2secs then stop nothing happens... Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 18, 2007 Corsair Employees Share Posted September 18, 2007 When you hit the power button on the front of your case or the power switch on the back of the PSU? Link to comment Share on other sites More sharing options...
kem11 Posted September 18, 2007 Author Share Posted September 18, 2007 When you hit the power button on the front of your case or the power switch on the back of the PSU? when i turn on the button on the case, i tried sitting it on the box and using a screwdriver and did the same thing Link to comment Share on other sites More sharing options...
Yellowbeard Posted September 19, 2007 Share Posted September 19, 2007 You may have a grounding or shorting issue. Try removing the MOBO from the case and placing it on a non-conductive surface (the box for the MOBO is good). Then, see if the system will post with just the CPU, video card, and memory installed. Link to comment Share on other sites More sharing options...
kem11 Posted September 19, 2007 Author Share Posted September 19, 2007 it still does the same thing..stupid 12V ATX cable! :P Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 20, 2007 Corsair Employees Share Posted September 20, 2007 If you can I would test the PSU with a different system. Link to comment Share on other sites More sharing options...
kem11 Posted September 22, 2007 Author Share Posted September 22, 2007 Alright...i have a friend coming over hopefully this week to test it with his hope it works Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.