Jump to content
Corsair Community

Corsair XMS 2700C2PT


DeathEvil

Recommended Posts

So, i buy 2 sticks of 512MB that memory and i overclock my barton from166FSBto200 i useing option 1:1 so the memory was overclock automaticly the spd settings after overclock was: lattency 3.0-4-4-9 and i have some restarts when i play!!!!!!!!!! voltage is 2.6(default) i can also chose 2.7 and auto (what is the best choice???) when I cahnge the voltage to higher, my memory gonna be slower???? or maybe i should change the timings?????????????? I check the memory using Memtest3.0 and memory pass all tests without a problem!!!!!!!!! so maybe it's CPU??? the voltage on CPU is 1.65 Thanks in advance for any suggestions
Link to comment
Share on other sites

  • 2 weeks later...
Increasing the voltage should add some stability. I cannot get mine to even post at 200Mhz with 2.7V. EDIT: Running at 200Mhz (400Mhz DDR) with 2.7V. I manually changed timings to 2.5-4-4-9 and all is well. By SPD yielded 3-4-4-9 and I guess this ram hates Cas 3.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...