skylow Posted September 5, 2007 Share Posted September 5, 2007 hello friends, I got a problem after i change my old LC POWER of 550W and put the Corsair 602 W. I got 2 Gb. DDR1 of crucial ram, the one with the leds up like some corsair ram. And when i torn off the computer the leds insist to still on . I put the multimeter on the board and its pass 2,4 volts at memory slots with de PC off. I got 5 volts on purple wire and 2,5 volts on green wire with pc off It´s normal ? Some times I torn de pc off and did want to boot again until i torned off on the backside switch e put on again. need help tanks Link to comment Share on other sites More sharing options...
skylow Posted September 5, 2007 Author Share Posted September 5, 2007 Can enyone verify de voltages of you PSU please ?? Just to see if its everything allright Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 6, 2007 Corsair Employees Share Posted September 6, 2007 What type of motherboard do you have? Link to comment Share on other sites More sharing options...
skylow Posted September 20, 2007 Author Share Posted September 20, 2007 It´s An Dfi Nf4 Lanparty With An Opteron 165 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 20, 2007 Corsair Employees Share Posted September 20, 2007 That is normal the MB is getting standby power and will do that test the PSU with a different MB to be sure. Link to comment Share on other sites More sharing options...
skylow Posted September 25, 2007 Author Share Posted September 25, 2007 ok. I´ll test . I start to see that PSU keep energy in 12v. wire after I turn pc off. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.