Jump to content
Corsair Community

Voltage and Overclock on Value Select DDR2


ipatinga

Recommended Posts

:!: What is the voltage for Corsair Value Select DDR2 memory? I ask this because Corsair does not state the voltage on the Value Select DDR2 page.

 

:!: I saw RAM GUY saying "All DDR2 modules have a max voltage of 2.1 Volts unless other wise stated!" on topic http://www.asktheramguy.com/v3/showthread.php?t=55667&highlight=DDR2+voltage+warranty.

This answer (2.1v on all DDR2 modules) is only for XMS2 or for Value Select DDR2 too?

 

:!: On topic http://www.asktheramguy.com/v3/showthread.php?t=54932, the solution applies to XMS2 memory only or Value Select DDR2 too?

 

:confused: I have a friend that increased the voltage on his two VS1GB667D2 to 1,8v and the speed to 800MHz. Now he is using 1,85v to keep stability. He told me that later he will propably have to apply 2.0/2.1v to keep stability, since the memory is obviously degrading. If the memories dies, will Corsair exchange the modules under Corsair warranty?

 

Thanks for all the help. :D:

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...