Jump to content
Corsair Community

msi k8t neo and 2 CMX512 - 3200C2PT rev 1.1


paladin1369

Recommended Posts

I installed 2 CMX512 - 3200C2PT rev 1.1 in the MSI K8T Neo-FIS2R and it will post at DDR 333, I changed it in the bios to 400 and it still shows 333. I tried it in slots 1&2 and 1&3 still no change, but if I install only 1 at a time one will show at ddr 400 and the other will show ddr 333. is the 1 stick of ram bad.
Link to comment
Share on other sites

  • Corsair Employees
Please set the memory timings and Frequency manually to the tested settings DDR 400 at Cass 2-3-3-6 and see if that does not solve the problem. Also please make sure that you have the latest bios and install them in slots 1-3 and set the Dim Voltage to 2.7 Volts.
Link to comment
Share on other sites

The one stick of ram has a SPD of 2700(i got this ram when it first came out) is there a way I can RMA this ram for one that has the correct SPD. the MSI board will not let me manually set the speed of the ram,it will change to the lowest SPD speed.
Link to comment
Share on other sites

  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...