warzeh Posted September 1, 2007 Share Posted September 1, 2007 Hi, I got a new pc which I made myself.These are my specs: Q6600 Abit IP 35 PRO 2gb ******** ram 8800GTS 640 OC Corsair 620HX When I installed all my parts,I tried to check my watercooling system by bridging the green and black pins on the PSU's rail,and it worked fine.After that I tried to open my pc,but nothing happened,it didnt boot.The leds on the mobo are not lighting and everything is plugged in correctly.I tried again with removing all un-nessecary parts that needed power but again nothing happened.I bridged the pins using the paperclip again,to see if watercooling was still working(The PSU was connected ONLY with watercooling)and it worked fine.Then I swapped PSU's.My old Coolermaster 450W worked fine on my new pc(everything working normally)and the Corsair PSU worked fine with my old PC.What is the problem? Link to comment Share on other sites More sharing options...
warzeh Posted September 2, 2007 Author Share Posted September 2, 2007 I just gave it another try,nothing happened again,but the PSU is making a soft "tac tac tac"noise which I havent noticed yesterday.Any thoughts? Link to comment Share on other sites More sharing options...
warzeh Posted September 2, 2007 Author Share Posted September 2, 2007 46 views and no replies.I could use some help here. Link to comment Share on other sites More sharing options...
Yellowbeard Posted September 4, 2007 Share Posted September 4, 2007 46 views and no replies.I could use some help here. It's been a holiday so no one has been in the office to answer your question. Have you tried clearing the CMOS on the MOBO after you change PSUs? Link to comment Share on other sites More sharing options...
warzeh Posted September 4, 2007 Author Share Posted September 4, 2007 It's been a holiday so no one has been in the office to answer your question. Have you tried clearing the CMOS on the MOBO after you change PSUs? Yes.I have tried everything. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 5, 2007 Corsair Employees Share Posted September 5, 2007 Let's get it replaced. Please follow the link in my signature “I think I have a bad part! Or *New* Tech Support Express” and we will be happy to replace them or it! Please make sure you let them know you are from the forum! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.