Jump to content
Corsair Community

CM2X2048-6400C4 Bad Module?


mick101

Recommended Posts

Hi,

I recently purchased the Corsair Memory Kit (2 CM2X1024-6400C4 sticks) posted in the title of this thread. I first noticed a potential problem with the memory while playing games. I would see errors "failure to load sky to memory" (sky changing to various different things) I have also had errors logging into windows and performing basic tasks (e-mail, internet, etc.)

 

I ran Memtest86+ V1.70 with both sticks and I received several errors. Took 1 stick out and passed Memtest smoothly without any errors. But when I take the stick that passed out and put in the other stick in Memtest (or Windows for that Matter) will not even boot....I think I may have a bad stick?

 

Note: I set the the memory voltage to 2.1 and manually set the timings to:

tRCD:4

tRP: 4

CAS Latency: 4

tRAS: 12

CPC: 2

Mem. Clock Speed: 800mhz

(I found this information on this forum) and I did disable Legacy USB.

 

You can see my system preferences above.

Thanks for any guidance.

Link to comment
Share on other sites

  • Corsair Employees
Let's get it replaced. Please follow the link in my signature “I think I have a bad part! Or “Tech Support Express” and we will be happy to replace them or it! Please make sure you let them know you are from the forum!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...