Jump to content
Corsair Community

Striker Extreme and TWIN2X2048-6400C4


Recommended Posts

I'm having some odd problems with this setup, the Striker Extreme cannot read the ram's SPD for some reason.

Those mems are on Asus QVL list for the Striker Extreme but it won't post on auto settings and same goes for any SLI setting whatsoever.

Only stable settings i can get is by manually setting timings @ 5-5-5-15-2T, when trying 4-4-4-12-2T trc 24 @ 2.1v memtest fails and windows get corrupted.

When looking in CPUZ under SPD the CAS readings are something like 37807077890 and it shows 400 and 533mhz settings. :laughing:

My noname DDR667 mem's work great and i see the timings in CPUZ.

Memtest #5 gives no errors so i assume the rams are fine.

Tried every bios from 901 and up to latest beta 1305.

The performance loss between those two timings are slim to none on DDR2 mem so i don't mind that but it would be nice to know how they got on Asus QVL list if Asus don't support them.

Anyone else had these problems?

Link to comment
Share on other sites

  • Corsair Employees
Let's get them replaced. Please follow the link in my signature “I think I have a bad part! Or *New* Tech Support Express” and we will be happy to replace them or it, please note that you are posting from the forum!
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...