Jump to content
Corsair Community

Twin3X 1333C9DHX And Asus P5K3 Delux


Tokboy

Recommended Posts

Hallo everybody.

Will start by exuse me for my bad english.

But hope that you understand it enyway.

 

My problem is. :[pouts:

 

Have moderboard Ausus P5K3 Delux

And Corsair TWIN3X 1333MHz DDR3 2048MB, Memory

 

But in BIOS i only get 1067MHz

Hope som one kan help me.

O sorry forgot to tell you Iám a real Beginner in Bios.

I always NOT mix in there.

So all is from the install disk

All I have fixt is the Boot thing.

 

So I hope som one will and have the time to help me.

 

Love Tokboy

Link to comment
Share on other sites

Hallo again.

Sorry for my dilay to answer.

Had not fix the mail replay thing in UserCP

 

Now i have make the changes in BIOS.

Exept for the choice for Memory MHz

There is NO choise for DDR3-1333MHz

So i pick DDR3-1067MHz insted

 

The test program didint workt.

It only clear my BIOS.

So that i will not test enymor.

 

After the fix in BIOS i get this in

CPU-Z

 


Northbridge		Intel P35/G33/G31 rev. A2
Southbridge		Intel 82801IR (ICH9R) rev. 02
Graphic Interface	PCI-Express
PCI-E Link Width	x16
PCI-E Max Link Width	x16
Memory Type		DDR3
Memory Size		2048 MBytes
Memory Frequency	534.6 MHz (1:2)
CAS#			9.0
RAS# to CAS#		9
RAS# Precharge		9
Cycle Time (tRAS)	24
Command Rate		2T

DIMM #1

General
Memory type		DDR3
Module format		UDIMM
Manufacturer (ID)	Corsair (7F7F9E0000000000)
Size			1024 MBytes
Max bandwidth		PC3-10700H (667 MHz)
Part number		

Attributes
Number of banks		8
Nominal Voltage		1.50 Volts
EPP			no
XMP			no

Timings table
Frequency (MHz)		444	592	666	
CAS#			6.0	8.0	9.0	
RAS# to CAS# delay	6	8	9	
RAS# Precharge		6	8	9	
TRAS			16	22	24	
TRC			22	30	33	

DIMM #2

General
Memory type		DDR3
Module format		UDIMM
Manufacturer (ID)	Corsair (7F7F9E0000000000)
Size			1024 MBytes
Max bandwidth		PC3-10700H (667 MHz)
Part number		

Attributes
Number of banks		8
Nominal Voltage		1.50 Volts
EPP			no
XMP			no

Timings table
Frequency (MHz)		444	592	666	
CAS#			6.0	8.0	9.0	
RAS# to CAS# delay	6	8	9	
RAS# Precharge		6	8	9	
TRAS			16	22	24	
TRC			22	30	33	

 

You kan see the compleat thing by this link

CPU-Z

 

So what do i do wrong?

And whitch of the DIMM sockets wold i put the memory in?

The moderboard user guid tell me to pot them in

DIMM-A2 and DIMM-B2

Is that right?

 

 

Love Tokboy

PS thanks for the help......

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...