niccolai Posted August 25, 2007 Share Posted August 25, 2007 The configurator does not make a recommendation for 8GB of DDR2. Is there a recommended setup using Corsair memory for this board? Will be running engineering apps that up to this point have been limited by the 4GB in XP. Would like to see if 8GB and Vista 64 does better. Thanks Link to comment Share on other sites More sharing options...
newjohn Posted September 25, 2007 Share Posted September 25, 2007 Your problem is that you need xp 64 bit or vista. If you choose to upgrade, there are many updates needed including the memory fix from microsoft. just search microsoft for "vista 4 gb memory" it will be something like kb xxx777. As far as the striker, it is supported but you will have to flash the bios Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 25, 2007 Corsair Employees Share Posted September 25, 2007 I would suggest two sets of Twin2x4096-6400C5DHX for 8 Gig of memory. And yes please get the latest BIOS and then load setup defaults and set the memory voltage to 2.0 Volts and you should be good to go! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.