capcgn Posted August 22, 2007 Share Posted August 22, 2007 Have Problems to run Vista stabil. Have set 2,2V at Memory Voltage and set Timing at 5-5-5-15 manuell. SLI- at 0%. Bios shows 1067 Mhz . Memtest ok. Please help....... What bwill be the best settings for this combination. Thank you Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 22, 2007 Corsair Employees Share Posted August 22, 2007 With 4 modules I would suggest you set the memory frequency manually to DDR800 and Disable SLI Ready Memory and just let the BIOS set the timings. Link to comment Share on other sites More sharing options...
capcgn Posted August 23, 2007 Author Share Posted August 23, 2007 thank you, here I set the timing mauell to 800 ??? Link to comment Share on other sites More sharing options...
capcgn Posted August 23, 2007 Author Share Posted August 23, 2007 Set to your recomandation and the bios is setting it to 800 at 5-5-5-18 ????? Is this ok ? Link to comment Share on other sites More sharing options...
DerekT Posted August 23, 2007 Share Posted August 23, 2007 With four dimms populated, that should be a good setup. Test with memtest from http://www.memtest.org Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.