Jump to content
Corsair Community

TWIN2X2048-8500C5D not running at spec


broker

Recommended Posts

I have the TWIN2X2048-8500C5D & MSI P6N Diamond motherboard with a Seasonic 650W SLI approved power supply running off of a Intel e6750. My memory does not run at the advertised spec of 1066 5-5-5-15-2T @2.2V. I receive constant 'memory dump' blue screen errors in game in Vista 64. This is my 2nd set of memory, I RMA'd the first pair. I am not overclocking. What should I do?
Link to comment
Share on other sites

  • Corsair Employees

Please make sure that you have the latest BIOS for your motherboard and then load optimized defaults and set the Memory Voltage to 2.2 volts and then set the timings to 5-5-5-15 (CAS-tRCD-tRP-tRAS) and then test the modules one at a time with http://www.memtest.org! Please allow memtest to run 2-3 passes on each module. If you still get errors, we will be happy to replace them! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.

 

Make sure when running memtest you have “Legacy USB Support” disabled in the BIOS.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...