Jump to content
Corsair Community

Bad stick of RAM


Recommended Posts

  • Corsair Employees

Please make sure that you have the latest BIOS for your motherboard and then load optimized defaults and set the Memory Voltage to 1.9 volts and then set the timings to 5-5-5-12 (CAS-tRCD-tRP-tRAS) and then test the modules one at a time with http://www.memtest.org! Please allow memtest to run 2-3 passes on each module. If you still get errors, we will be happy to replace them! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.

 

Make sure when running memtest you have “Legacy USB Support” disabled in the BIOS.

 

If one module is failing, then let's get them replaced. Please follow the link in my signature “I think I have a bad part! Or *New* Tech Support Express” and we will be happy to replace them or it! Please make sure you let them know you are from the forum!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...