Jump to content
Corsair Community

Dominator CM2X1024-6400C4D


Recommended Posts

Hi, I am currently running a pair of Dominator xms2-6400C4D memory modules on a crosshair motherboard, with an AMD-FX62 2.8GHZ CPU. Operating system Vista Ultimate 32Bit. I have alot of problems with bsods lately especially memory management errors. I set memory timings from your site at 4-4-4-12 at 2T command rate at 2.1volts. Memory speed DDR2-800 all other settings on motherboard at standard settings. Have taken both modules out and tested each one seperately from the A1 slot with memtest. One module o.k. no errors the other module red screen from first test. Tested both modules with OS again, same thing one OK the other faults start occuring when windows loads. All drivers are up to date and working well on the good module albeit the computer is slower with the one memory module. Bios version on motherboard 0604
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...