Jump to content
Corsair Community



Recommended Posts



Sorry for my English but it is not my first language.


I have bought Corsair PC2-800 CL4 KIT TWIN2X2048-6400C4.

Unfortunately the mainboard (ASUS M2N32-SLI WiFi Deluxe nForce590 SLI) will only detect one of them. The Bios will always recognize only 1024 MB instead of 2048.

If i use each one of them alone both of them work fine. But if i use both simultaneous the mainboard detect only one of them. I tried several slot-combination (A1 + B1; A1 + A2; A1 + B2) but nothing changed.

I also called the support from Asus, but they have no solution. They think it may can be a incompatibility of the memory.


Do you have any ideas to solve this problem?



Link to comment
Share on other sites

  • Corsair Employees
If both modules run with our problems one up but this happens with both installed you either have a short in your case on the bottom of the MB or the MB or CPU is failing. I would suggest testing the CPU in another system.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...