Jump to content
Corsair Community

cmx1024-3200pro & DH800


kingsx

Recommended Posts

I have 2 sets of these matched pair modules. 1 set works fine and the machine posts and runs without issue.

 

The other set however will not work for me in either of 2 DH800 boards.

 

My initial thought was that it was just a bad set of memory, but I am hopeful you may have a solution other than rma...

Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest BIOS for your motherboard and then load optimized defaults and set the Memory Voltage to 2.75 volts and then set the timings to 3-3-3-8 (CAS-tRCD-tRP-tRAS) and then test the modules one at a time with http://www.memtest.org! Please allow memtest to run 2-3 passes on each module. If you still get errors, we will be happy to replace them! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...