Jump to content
Corsair Community

Need Bios settings for Corsair 1024-4400pt & dfi lanparty mobo


Recommended Posts

Ok i've just upgraded my processor only to find that i can no longer boot into windows on 2 of my 3 partitions and on the one that i can boot into, it reboots itself before i can do anything.


So if anyone can help me i would be very very greatful. I know very little about the setup of ram timings, in desperate need now as i have all my work on there that im unable to currently retrieve.

Link to comment
Share on other sites

  • Corsair Employees

I would suggest you not over clock your system and try these settings and test with http://www.memtest.org.

Memory Voltage 2.75 Volts

CAS Latency CL=2.0

Row Cycle Time tRC Bios Default

Row Refresh Cyc Time tRFC Bios Default

Ras# to CAS# delay tRCD 3

Row to Row delay Bios Default

Min Ras# Active Time tRAS 11

Row Precharge Time tRP 3

Write Recovery Time Bios Default

Write to Read delay Bios Default

Read to Write Delay Bios Default

Refresh Period tREF Bios Default

Enable 2T Timing Disabled

Then test the system with http://www.memtest.org and make sure it's stable! If you have problems, I would set Enable 2T Timings to AUTO and test it again!

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...